Roofing color steel tile
Anticorrosive tile is a kind of highly effective anticorrosive tile. And the rapid advance of modern science and technology creates all kinds of new anti-corrosion tiles, durable, colorful, how should we choose high-quality roof anti-corrosion tiles?
1. Whether the coloring is uniform
Anticorrosive tile coloring is about the same as we buy clothes, need to observe the color difference, good anticorrosive tile coloring is very even, there is no color difference phenomenon, and can not fade for a long time, and poor quality anticorrosive tile, color difference contrast will be more obvious, once through the wind and rain, color difference is more obvious.
Plant roof area is large, often affected by the sun, rain, cold and hot climate and other natural conditions and vibration, plant roof tile is easy to aging. Once the roof tile aging, users are bound to carry out renovation, which is a large cost. Therefore, in the selection of anti-corrosion tile must be able to resist aging, long life.
3. Whether the appearance is smooth
When we buy anything, we need to pay attention to the appearance characteristics, because the appearance is essential to our attention, anticorrosive tile is the same, see if the appearance is smooth is the first condition for us to choose it.
4. Water permeability
Pour the water into the groove of the anticorrosive tile to see if the water flow is straight and not tortuous. If it is straight, the density is relatively uniform. Check the back within 24 hours to see if there is any sign of water penetration, if not, it shows that the anticorrosive tile material is better.
5. sound density
Knock anticorrosive tile with the hand, listen to the sound that anticorrosive tile gives out whether clear and loud, if the sound of knock is more clear and crisp, it is the tile with high density, if the sound of knock is more stuffy, it is the tile with lower density.
6. corrosion resistance
Anticorrosion workshop roof tile anticorrosion requirements are very high, the application and production of acid, alkali, salt and corrosive solvents in the process of industrial production, atmosphere, groundwater, ground water, soil containing corrosive media, will make the building corrosion. So you need to choose antiseptic tiles with good antiseptic properties. And ordinary factory roof often by the wind and rain, it is likely to rust, so ordinary factory had better choose good anti-corrosion tile.
Anticorrosive tile in the transport of more bumpy more severe road, then it is necessary to reduce the damage of anticorrosive tile to pay special attention to, in this process we should pay attention to what matters.
1. Transport, to make the surface of the anticorrosive tile is not damaged, in the process of transportation, the speed should be kept in a stable state, to prevent your speed is not stable so that the surface of the anticorrosive tile has traces of friction, this is we should pay special attention to. When we arrive at the destination, we must be careful not to damage the anticorrosion tiles when unloading.
2. It is recommended to use aerial cranes if there are aerial cranes. In this way, the damage can be reduced. There are few people passing by the place where the goods are unloaded, and the safety of personnel should be paid attention to. Moreover, a layer of buffer should be placed at the bottom of the unloading to prevent damage to the bottom of the anticorrosion tile
3. When transporting anticorrosive tiles, we should pay attention to the way of loading anticorrosive tiles. Anticorrosive tiles are transported with shelves and placed on the surface of the anticorrosive tiles.
The above is the attention of anticorrosive tile in transportation, I hope to help you, as far as possible to avoid damage in the middle of the phenomenon.