Best API 5CT P110 Pipe Casing and Tubing
API 5CT P110 Casing and Tubing is a high grade than J55/K55, N80, L80 and T95, tensile strength minimum 862 Mpa, yield strength 758 to 965 Mpa. P110 casing ends with white band to specify this material, it is widely used for oil drilling and producing in a particular surroudings especially for a deep oil well.
| Productn Name | API 5CT carbon steel casing pipe tubing pipe for oil and gas |
| Standard | API SPEC 5CT, API SPEC 5B |
| Thread Connection | STC,LTC, BTC & Premium connection |
| Steel Grade | J55 K55 L80 L80-13Cr N80-1 N80-Q N80-1 C90 C95 T95 P110 Q125 |
| Usage | Tubing is used for extracting oil or gas from wells,while casing for sidewall |
| MOQ | 5Tons/Size |
| Trade terms | FOB,FCA, CFR, CIF, CPT, EXW etc. |
| Payment | T/T, L/C, etc. |
| Delivery time | 10 ~ 20 days after receipt of deposit, ASAP |
| Loading Port | QingDao, TianJin, ShangHai port, China |
P110 Casing is installed downhole to provide structural integrity to the wellbore and must withstand external-collapse pressure from rock formations and internal-yield pressure from fluid and gas. It needs to bear its own weight and withstand the torque and transaxial pressure placed on it while running downhole. Casing is considered as a pipe pile that will stabilize the oil well.
P110 Tubing is installed inside the casing. It is used to transport (pump) crude oil or natural gas from the source rock to the ground wellhead. Inside tubing is sucker rods, where used for pumping oil and gas.
Any deformation such as crease, hairline, separation, crack or scab is not acceptable on both inner and outer surfaces of the product. All these defects should be completely removed, and the removed depth must not exceed 12.5% of nominal wall thickness.
The surface of thread of coupling and API 5CT P110 Casing Tubing should be smooth without any burr, tear or other defects that may have a negative impact on the strength and close connection.
Deformations which mentioned above are not allowed to appear on the outer surface of API 5CT P110 Casing Tubing coupling.
API 5CT P110 Casing Tubing is offered with a free length range from 8 to 13m on basis of the SY/T6194-96 norm. However, it is also available no less than 6m length and its quantity should be no more than 20%.
It's important for oil and gas operators to protect their production well casings from corrosion with cathodic protection & API 5CT P110 OilField Tubing primarily serves to transfer oil and gases.
